One-click ONU authorization, signal and alarms within seconds, router Wi-Fi and passwords via TR-069, backups and audit log — no servers to install and no public IP on the OLT.
New ONUs show up in the panel by themselves. Type, speed, VLAN, Mgmt IP and TR-069 in one form, with presets for typical plans.
Rx and Tx of every ONU, signal history, LOS and dying gasp, rogue ONUs, OLT card and power alarms — in events within seconds via SNMP traps.
Wi-Fi, passwords, channels, LAN ports, WAN, reboot, diagnostics and speed test — ZTE, Huawei and other vendors.
A subscriber factory-reset the router — the platform restores the provider's Wi-Fi and passwords at the first contact.
IPTV, LAN-to-LAN, DHCP Snooping, NTP, VoIP and Mgmt VLAN — real OLT commands, no manual CLI work.
OLT configuration is saved after every change; the OLT's own command log shows who changed what — even outside the platform.
Cards and firmware versions, SFP of every PON port, temperature, power, fans, card reboot — all on the OLT page.
Armenian, Russian, English. Installs as an app on desktop and phone.
Four steps, 15–20 minutes, no network downtime and no public IP on the OLT.
Leave a request: we will get in touch, answer your questions and create your company's workspace at its own address: your-isp.olt.am.
The panel gives one command for the MikroTik: a secure WireGuard tunnel to the hub comes up. No public IP on the OLT, no ports opened to the internet.
Telnet login and SNMP community. The platform checks connectivity, detects the vendor and reads all ONUs, VLANs and profiles from the OLT.
Internet and management VLANs, Mgmt IP pool, Remote ACL — and all ONUs connect to TR-069 automatically.
One price for any OLT: ZTE, BDCOM or V-SOL. No charge per ONU or per panel user.
ZTE C300 and C320 (ZXAN 2.1) — fully. BDCOM and V-SOL — ONU monitoring and management (in progress), Huawei MA56xx — on request.
Any GPON/EPON ONU the OLT registers: ZTE, Huawei, UTStarcom and others. Router Wi-Fi and passwords — via OMCI from the OLT or via TR-069 (built-in ACS).
No. The OLT stays in your network; the connection goes through a WireGuard tunnel from your MikroTik. Public port forwards can be closed.
Yes. The platform reads already configured ONUs, VLANs and profiles straight from the OLT — nothing to configure again. Migration can be done one PON port at a time.
Each provider in its own cabinet, OLT passwords encrypted, every command logged, OLT access restricted by ACL to the hub and your MikroTik only.
5000 AMD per OLT per month, unlimited ONUs. The first month is free. Conversion to other currencies is in the “Pricing” section.